Your Sensible Source For Packaging Machinery, Supplies, Installation and Service
Shop Now
Email Us773.478.6001
Robopac®'s Patented Powered Variable Pre-Stretch Roll Carriage

The Technoplat 708 features an S winding pattern roll carriage with Quick Load System that provides 40% more film contact than the W winding pattern (commonly used by competitors) to provide better control of film through the roll carriage and fewer film breaks.

This innovative, dual motor pre-stretch system provides you the ability to pre-stretch film from 150% up to 400% using two independent, variable AC motors.

Both the pre-stretch and containment force are adjustable via the operator control panel. Robopac®'s patented high-performance S-Wrap Pattern (with Quick Load System) and load cell corner compensation and containment force device give you total film control.
Unit of Measure

Specifications

Brands

N/A Robopac®

Type

N/A Stretch Turntable

Pneumatic Pressure

N/A 60 psi

Features

N/A Semi-Automatic

Performance (Technical Features)

Production Speed

N/A Up to 40 L/h

Turntable Speed

N/A 5 to 12 rpm

Alternating Current (AC) Voltage for Turntable Drive Power

N/A 1 hp

Load Handling (Technical Features)

Diamond Plate Turntable Diameter

N/A 65 in

Diamond Plate Turntable Finish

N/A Steel

Maximum Load Height

N/A 110 in

Minimum Load Weight

N/A 4,400 lb

Film Delivery System (Technical Features)

Film Delivery System

N/A Power Variable Stretch

Standard Pre-Stretch

N/A Variable to 400% with up to 9 Different Levels per Load

Containment Force

N/A Variable Electronic with up to 9 Different Levels per Load

Corner Compensation

N/A Load Cell

Roll Carriage Speed

N/A Variable Up and Down

Standard Film Width

N/A 20 in

Automatic Film Cut

N/A Cut and Seal (with Brush) Standard

Load Height Detection

N/A Infrared photocell detects dark, clear and reflective products. Eliminates false reading on gaps in loads.

Safety (Technical Features)

Roll Carriage Safety Stop

N/A Standard

European Conformity (CE) Compliant

N/A Yes

Anti-Fall Device

N/A Standard

Lock-Out/Tag-Out Compliant

N/A Yes

Additional (Technical Features)

Top Sheet Wrap

N/A Standard

Banding

N/A Standard

Forklift Portable

N/A Front and Rear

Service Requirements (Technical Features)

Alternating Current (AC) Voltage

N/A 110 V

Phase

N/A 1

Frequency

N/A 60 Hz

Electric Tolerance (±)

N/A 10 %

National Electrical Manufacturers Association (NEMA) 12 Enclosure

N/A Standard

Warranty

N/A 5 years

Roll Carriage

Roll Carriage

N/A The Technoplat 708's variable pre-stretch delivers the best film economy for all films and all loads. Six selectable wrap patterns allow you to optimize each of your load types, reduce damage, improve productivity and reduce film costs.

Turntable

Turntable

N/A The Technoplat 708 turntable is supported by 28 heavy-duty casters and can handle loads up to 4,400 lbs. Weight capacity increases to 5,500 lbs by simply adding 16 additional casters. This can be done at order entry or added later in the field.

The heavy-duty 65-inch turntable is powered by a full 1 horse power AC motor and is made from 7/8" steel. The oversize turntable safely and easily accommodates a 40" x 48" with no overhang.

Standard Features

Standard Features

N/A Roll carriage lift motor with encoder, delivers precise placement of the film (within 0.2 inches of setting) when used in CUBE mode.

Photocell automatically detects top of load and utilizes infrared sensors that provide better readings on dark and/or shiny products that can provide false readings with traditional sensors.

NEMA 12 control panel enclosure protects against dust, dirt, fibers and lint. It also protects from dripping water, external condensation and other noncorrosive liquids.

Tubular cold rolled steel mast provides superior rigidity, minimizing torque and flex.

Heavy-duty chain provides smooth and accurate carriage travel up and down. New heavy-duty 1 hp AC motor and gear box ensure years of trouble-free performance.

Forklift portable from both the front and back. Making it safe and easy to place the Rotoplat 708 anywhere in your operation.

CE approved, conforming to global electrical and safety standards.

Control panel is UL508 approved.

Features Adjustable via Control Panel

Features Adjustable via Control Panel

N/A
  • Turntable rotation speed
  • Upward/downward carriage speed
  • Film tensioning
  • Upward/downward Force to Load
  • Pre-stretch ratio
  • Upward/downward pre-stretch
  • Bottom wraps
  • Top wraps
  • Wrapping start point
  • Photocell sensing delay

Wrap Cycles and Custom Programs

Wrap Cycles and Custom Programs

N/A
  • Top sheet cycle
  • Top platen cycle (top platen is optional)
  • Reinforcing wrap cycle
  • 6 user defined programs