Your Sensible Source For Packaging Machinery, Supplies, Installation and Service
Shop Now
Email Us773.478.6001
Request Information
Automatic rotating table with driven roller surface to wrap and stabilize loads on pallets with stretch film to be used in automatic packaging at the end of the line.

Rotoplat series wrapping machines stand out for their driven roller surface rotation system which is made up of a toothed thrust bearing supported by a high load capacity ball bearing and high resistance pin transmission; this construction solution ensures high operating reliability and working life in the most wearing use conditions.
Unit of Measure

Specifications

Brands

 N/A Robopac®

Fixed Pre-Stretch

 N/A Up to 340 %

Variable Pre-Stretch Set via Control Panel

 N/A 150 to 400 %

Containment Force/Corner Compensation

 N/A Load Cell

Features

 N/A Automatic

Technical Features

Minimum Pallet Dimensions

 N/A 600 x 800 mm24 x 32 in

Maximum Pallet Dimensions

 N/A 1000 x 1200 mm40 x 48 in

Note for Pallet Dimensions

 N/A Possibility of Stretch Wrapping the Half and Quarter Pallet.

Minimum Front Leading

 N/A 800 mm32 in

Maximum Front Leading

 N/A 1,000 mm40 in

Note for Front Leading

 N/A Possibility of Stretch Wrapping the Half and Quarter Pallet.

Minimum Pallet Height

 N/A 500 mm20 in

Maximum Pallet Height

 N/A 2000 mm80 in

Maximum Pallet Weight

 N/A 2,000 kg4,409.25 lb

Table Height

 N/A 500 mm20 in
Output Capacity1 N/A 40 Pallet/hour

Standard Pre-Stretch Carriage

 N/A PGSM

Pre-Stretch Ratio Included

 N/A 177 %

Standard Electrical Features

Power Supply Voltage

 N/A 380 V400 V415 V

Power Supply Voltage Tolerance (±)

 N/A 5 %

Power Supply Frequency

 N/A 50 Hz

Standard Pneumatic Features

Air Pressure

 N/A 6 bar

Reel Features

Optional Reel Height

 N/A 500 to 750 mm20 to 30 in

Maximum Reel Diameter

 N/A 250 mm10 in

Maximum Cardboard Standard Reel Height

 N/A 510 mm20.4 in
Workable Film Thickness2 N/A 17 to 30 µm

Top Film Thickness

 N/A 40 to 100 µm

Additional Information

Additional Information

 N/A Table rotation speed and relevant acceleration and deceleration ramps are controlled by a frequency converter; this guarantees that the table always stops in phase regardless of the load weight and makes sure it is always aligned with the infeed and outfeed conveyors, assuring correct pallet supply and unloading.

Rotoplat 3000 HD: suited to wrap and move pallets in automatic cycles in merchandise sectors that require high performance.

PGSM Carriage
  • Single motor on board
  • Optional kits for different pre-stretch ratios
  • Can be equipped with reels h. 500 mm - 20" (STD) or h. 750 mm. - 30" (OPT)
PGSA Carriage
  • Two motors on board
  • Can be equipped with reels h. 500 mm - 20" (STD) or h. 750 mm. - 30" (OPT)
Deliver EXACTLY the right amount of film at EXACTLY the right position with EXACTLY the right containment force.
  • Reduces film cost by 30% to 55%
  • Improves load containment
  • Reduces product damage by 40%
Multi-Level Variable Pre-Stretch
  • Ensures best film economy for all loads
  • Ensures best film economy for all films
  • Ensures highest containment level attainable for all films
  • Delivers 30% to 55% film savings
Multi-Level Variable Containment Force
  • Delivers the optimal containment force at each level
  • Enables the delivery of the highest pre-stretch at all levels
Strategic Film Placement
  • Scientific approach to ultimate load containment
  • Place film precisely where it has the most impact on load containment
Proactive Corner Compensation
  • Reduces product damage on corners
  • Improves containment on flat sides of loads
  • Enables higher containment levels on each revolution

Note

Note

 N/A The contents of this catalog has been verified before printing. Robopac® reserves the right to modify in every moment the technical characteristics of the products and accessories illustrated in the present document.
  • 1 Under defined wrapping cycles and pallet sizes.
  • 2 According to film quality.