Your Sensible Source For Packaging Machinery, Supplies, Installation and Service
Shop Now
Email Us773.478.6001
3M™ AccuGlide™ 3 Taping Head for low impact sealing and higher productivity

Versatile side belt drive

Located on each side of the 3M-Matic™ Automatic Adjustable Case Sealer 800a, traction-grip drive belts center and stabilize a variety of RCS heights. The side drives are even repositionable to provide a greater stability for taller boxes.

Use with clean dry boxes in dry, relatively clean environments at 40ºF to 120ºF (4.4ºC to 48.9ºC).

Contact your 3M representative for special modifications that may be available for sizes not listed.
Unit of Measure

Machine Specifications

Voltage

N/A 115 V

Current

N/A 2.8 A

Machine Dim. (W)

N/A 38.5 in978 mm

Machine Dim. (L)

N/A 36 in914 mm

Frequency

N/A 60 Hz

Power

N/A 315 W
Machine Weight1 N/A 350 lbs160 kg

Tape Size

N/A 2 to 3 in48 to 72 mm

Min. Machine Dim. (H)

N/A 53 in1346 mm

Max. Machine Dim. (H)

N/A 86 in2184 mm
Machine Dim. (A)2 N/A 18 in457 mm

Min. Machine Dim. (B)

N/A 24 in610 mm

Max. Machine Dim. (B)

N/A 35 in889 mm
Machine Dim. (C)3 N/A 4 in102 mm

Machine Dim. (F)

N/A 24.5 in622 mm

Cord Length

N/A 8 ft

Operating Rate

N/A Up to 40 cases per minute

Drive Belt Speed

N/A 100 ft/min0.5 m/s

Options

N/A Box hold down attachment Infeed and exit conveyors Locking casters Low tape indicator

Specifications

Manufacturer

N/A 3M

Notes

N/A This technical information and data should be considered representative or typical only and should not be used for specification purposes.

The 3M-Matic™ Adjustable Case Sealer 800a/800a3 can accommodate most boxes within the size range listed here.

However, if:
(Box Length in Direction of Seal) / (Box Height)
is less than 0.75
Boxes should be test run to ensure proper machine performance.

Box Capacities

Min. Box Height

N/A 4.75 in121 mm

Max. Box Height

N/A 24.5 in622 mm

Min. Weight Range

N/A 5 lbs3 kg

Min. Box Length

N/A 6 in152 mm

Max. Box Length

N/A Unlimited

Min. Box Width

N/A 5.5 in140 mm

Max. Box Width

N/A 24.5 in622 mm

Max. Weight Range

N/A 85 lbs38 kg

Features

Product Use

N/A User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s method of application.

Warranty and Limited Remedy

N/A THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE:

3M sells its 3M-Matic™ Adjustable Case Sealer 800a, 800a3 and 800ab/ab3 with the following warranties:

  1. The Taping Head knife blades, springs and rollers will be free from all defects for ninety (90) days after delivery.
  2. All other Taping Head parts will be free from all defects for three (3) years after delivery.
  3. All other parts will be free from all defects for two (2) years after delivery.
Please refer to individual data pages for additional details and exceptions. If any 3M-warrantied part is proved to be defective within its warranty period, then the exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or replace the part, provided the defective part is returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating environment, improper utilities or operator error.

Limitation of Liability

N/A 3M and seller shall not be liable for direct, indirect, special incidental or consequential damages based upon breach of warranty, breach of contract negligence strict liability or any other legal theory.

The foregoing Equipment Warranty and Limited Remedy and limitation of Liability may be charged only by a written agreement signed by authorized officers of 3M and seller.

  • 1 Uncrated
  • 2 Optional infeed/exit conveyors
  • 3 Optional casters