Practical Packaging Solutions, Inc.
Practical Packaging Solutions, Inc.
544 Windy Point Dr.
Glendale Heights, IL 60139
Phone: 773.478.6001
Fax: 773.478.6026
Email: info@practicalpackaging.com
Website: www.practicalpackaging.com
Print Back
The series FP560 - FP560A - FP870A of manual and semi-automatic L-sealers stand out for an excellent price/quality ratio and for their modular frame. All the models of this range can indeed be supplied with or without shrink tunnel. Compared to the traditional L-sealing hood packers, the FP series provides higher outputs as well as the possibility of using Polyethylene film, besides the traditional shrink films.

The manual and semi-automatic series is the ideal solution for outputs up to 1500 packs/hour.
Unit of Measure

Specifications

Brands

 N/A Smipack

Production Capacity Output

 N/A Up to 800 packs/hour

Note for Production Capacity Output

 N/A The stated speed can change according to the product size, the pack collation and the type of film used.

Sealing Bar Length

 N/A 22.05 in

Sealing Bar Width

 N/A 16.93 in

Maximum Pack Height

 N/A 9.06 in

Industry Standards

 N/A European Conformity (CE)

Power Supply Voltage

 N/A 220 V240 V

Electrical Terminals for 220/240 Volt (V) Power Supply

 N/A 1PH+N+PE

Power Supply Frequency

 N/A 50 Hz60 Hz

Installed Power

 N/A 2450 W

Speed of Conveyors

 N/A 62.33 ft/min

Maximum Film Reel Size

 N/A 23.62 in

Maximum Film Reel Diameter

 N/A 11.81 in

Machine Length

 N/A 79.13 in

Machine Width

 N/A 31.10 in

Machine Height

 N/A 41.34 in

Machine Net Weight

 N/A 284 lb

Features

Features

 N/A
  • Motorized sealing bar controlled by inverter
  • PTFE-coated sealing blade
  • Closed-circuit liquid cooling of the sealing bars
  • Viewer of the coolant level
  • Sealer and tunnel working height adjustable by means of an outer crank
  • Automatic pack discharge by means of a motorized conveyor
  • Flextron® control system equipped with:
    • Alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays
    • Modular power section, separated from the control panel and characterized by longer-lasting solid state relays
    • Possibility of scheduling up to 10 different work cycles
  • Reduced power consumption
  • Manual L-sealer
  • Double hood hold-down electromagnet, that highly reduces the pressure of the operator on the sealing arm so as to ensure a better sealing
  • Pack deviation device