Practical Packaging Solutions, Inc.
Practical Packaging Solutions, Inc.
544 Windy Point Dr.
Glendale Heights, IL 60139
Phone: 773.478.6001
Fax: 773.478.6026
Email: info@practicalpackaging.com
Website: www.practicalpackaging.com
Print Back
The Combi RS2000 is a high speed, fully automatic case sealer capable of top and bottom sealing different size cases within a given range. Built for speed and flexibility, the RS2000 is ideal for high volume lines with random case sizes in distribution or fulfillment centers or manufacturing sites where different lines converge for sealing.

The simultaneous three stage sealing process first indexes cases with an automatic gating mechanism; folds all four top flaps, and finally seals the top and bottom utilizing Allen Bradley Programmable Logic Controllers (PLC) and twin servo motors for accurate positioning and consistent sealing at the desired production rates.

You can have a different size case at each stage of the sealing process at speeds up to 20 cpm. Each machine is custom engineered to meet your specifications including variations in case size, weight, and operator orientation.
Unit of Measure

Specifications

Voltage

 N/A 230 V

Phase

 N/A 3

Current

 N/A 30 A

Speed

 N/A up to 15 cases/minute

Frequency

 N/A 60 Hz

Min. Case (L)

 N/A 10 in254 mm

Min. Case (W)

 N/A 8 in203 mm

Min. Case (H)

 N/A 6 in152 mm
Max. Case (L)1 N/A 28 in711 mm
Max. Case (W)2 N/A 22 in559 mm
Max. Case (H)3 N/A 22 in559 mm

Manufacturer

 N/A Combi Packaging Systems

Footprint (L)

 N/A 13 ft 11 in 424 cm

Footprint (W)

 N/A 5 ft 2 in 157 cm

Air Consumption

 N/A 80 PSI clean, dry air; consumes approximately 4 cfm

Discharge Height

 N/A 28 to 34 in

Machine Benefits

N/A

  • Custom engineered to meet your exacting specifications including variations in case size, weight and operator orientation provides you maximum efficiency.
  • Allen Bradley PLC analyzes sensor input and controls sequence and timing for 3-stage operation of indexing, folding and sealing and controls function of each stage allowing for high speed production.
  • Electric control panel with main disconnect switch can be mounted on either side for fast access and convenient line configuration.
  • Top flap compression rollers on each side positions and closes flaps before taping for an improved seal.
  • Servo controls provide consistent power for precise positioning and greater response time.
  • 3M AccuGlide™ 3 taping heads precisely apply a full range of box sealing tapes in 2" to 3" widths.
  • Sliding access doors with electrical interlocks disconnect power and air for operator safety.
  • Safety access-control panels are made of punched steel allowing operator to observe case flow.
  • 1 Case weight requirements at least 5 lbs.
    Case height not to exceed 0.8 x length
  • 2 Case weight requirements at least 5 lbs.
    Case height not to exceed 0.8 x length
  • 3 Case weight requirements at least 5 lbs.
    Case height not to exceed 0.8 x length