Practical Packaging Solutions - Smipack Manual/Semi-automatic Shrink Packaging L-Sealing Equipment

Unit of Measure

Items	FP560 Smipack up to 800 packs/hour Output Manual Shrink Packaging L-Sealing Equipment Add To Cart Request Quote	FP560A Smipack up to 1500 packs/hour Output Semi-automatic Shrink Packaging L-Sealing Equipment Add To Cart Request Quote	FP870A Smipack up to 900 packs/hour Output Semi-automatic Shrink Packaging L-Sealing Equipment Add To Cart Request Quote	S870 Smipack up to 300 packs/hour Output Semi-automatic Shrink Packaging L-Sealing Equipment Add To Cart Request Quote
Description	N/A The series FP560 - FP560A - FP870A of manual and semi-automatic L-sealers stand out for an excellent price/quality ratio and for their modular frame. All the models of this range can indeed be supplied with or without shrink tunnel. Compared to the traditional L-sealing hood packers, the FP series provides higher outputs as well as the possibility of using Polyethylene film, besides the traditional shrink films. The manual and semi-automatic series is the ideal solution for outputs up to 1500 packs/hour.	N/A The series FP560 - FP560A - FP870A of manual and semi-automatic L-sealers stand out for an excellent price/quality ratio and for their modular frame. All the models of this range can indeed be supplied with or without shrink tunnel. Compared to the traditional L-sealing hood packers, the FP series provides higher outputs as well as the possibility of using Polyethylene film, besides the traditional shrink films. The manual and semi-automatic series is the ideal solution for outputs up to 1500 packs/hour.	N/A The series FP560 - FP560A - FP870A of manual and semi-automatic L-sealers stand out for an excellent price/quality ratio and for their modular frame. All the models of this range can indeed be supplied with or without shrink tunnel. Compared to the traditional L-sealing hood packers, the FP series provides higher outputs as well as the possibility of using Polyethylene film, besides the traditional shrink films. The manual and semi-automatic series is the ideal solution for outputs up to 1500 packs/hour.	N/A Sealing and shrinking in one operation PTFE-coated sealing blade Air cooling of the machine frame Closed-circuit liquid cooling of the sealing bars Viewer of the coolant level Height adjustment of the internal packaging plate Mobile product-holding plate, loose from the film reel support to allow a better adjustment of the film to the pack size Double hood hold-down electromagnet Automatic hood release Reduced power consumption Compliance with CE regulations
Brands	N/A Smipack
Production Capacity Output	N/A Up to 800 packs/hour	N/A Up to 1500 packs/hour	N/A Up to 900 packs/hour	N/A Up to 300 packs/hour
Note for Production Capacity Output	N/A The stated speed can change according to the product size, the pack collation and the type of film used.	N/A The stated speed can change according to the product size, the pack collation and the type of film used.	N/A The stated speed can change according to the product size, the pack collation and the type of film used.	N/A
Sealing Bar Length	N/A 22.05 in	N/A 22.05 in	N/A 34.25 in	N/A
Sealing Bar Width	N/A 16.93 in	N/A 16.93 in	N/A 24.41 in	N/A
Maximum Pack Height	N/A 9.06 in	N/A 9.06 in	N/A 11.81 in	N/A
Film Handled	N/A	N/A	N/A	N/A Up to 120 gauge
Film Material	N/A	N/A	N/A	N/A Polyolefin PVC
Industry Standards	N/A European Conformity (CE)
Flextron® Control System Equipped With:	N/A	N/A	N/A	N/A Alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays, that allow a simple and precise control of all the machine operations, such as: Machine status Number of packs produced by an electronic pack counter Adjustment of the sealing temperature Adjustment of the shrinking delay Adjustment of the shrinking time Adjustment of the shrinking chamber temperature Adjustment of the hood-opening delay Possibility of scheduling up to 10 different work cycles Troubleshooting Modular power section, separated from the control panel and characterized by: Remote-control switches for the power control In case of failure, possibility of replacing just the damaged module, without losing the data stored in the memory
Power Supply Voltage	N/A 220 V240 V	N/A 220 V240 V	N/A 220 V240 V	N/A
Electrical Terminals for 220/240 Volt (V) Power Supply	N/A 1PH+N+PE	N/A 1PH+N+PE	N/A 1PH+N+PE	N/A
Power Supply Frequency	N/A 50 Hz60 Hz	N/A 50 Hz60 Hz	N/A 50 Hz60 Hz	N/A
Installed Power	N/A 2450 W	N/A 2500 W	N/A 3100 W	N/A
Speed of Conveyors	N/A 62.33 ft/min	N/A 62.33 ft/min	N/A 62.33 ft/min	N/A
Maximum Film Reel Size	N/A 23.62 in	N/A 23.62 in	N/A 31.50 in	N/A
Maximum Film Reel Diameter	N/A 11.81 in	N/A 11.81 in	N/A 11.81 in	N/A
Machine Length	N/A 79.13 in	N/A 79.13 in	N/A 120.08 in	N/A
Machine Width	N/A 31.10 in	N/A 31.10 in	N/A 41.54 in	N/A
Machine Height	N/A 41.34 in	N/A 41.34 in	N/A 44.29 in	N/A
Machine Net Weight	N/A 284 lb	N/A 326 lb	N/A 545 lb	N/A
Features	N/A Motorized sealing bar controlled by inverter PTFE-coated sealing blade Closed-circuit liquid cooling of the sealing bars Viewer of the coolant level Sealer and tunnel working height adjustable by means of an outer crank Automatic pack discharge by means of a motorized conveyor Flextron® control system equipped with: Alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays Modular power section, separated from the control panel and characterized by longer-lasting solid state relays Possibility of scheduling up to 10 different work cycles Reduced power consumption Manual L-sealer Double hood hold-down electromagnet, that highly reduces the pressure of the operator on the sealing arm so as to ensure a better sealing Pack deviation device	N/A Motorized sealing bar controlled by inverter PTFE-coated sealing blade Closed-circuit liquid cooling of the sealing bars Viewer of the coolant level Sealer and tunnel working height adjustable by means of an outer crank Automatic pack discharge by means of a motorized conveyor Flextron® control system equipped with: Alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays Modular power section, separated from the control panel and characterized by longer-lasting solid state relays Possibility of scheduling up to 10 different work cycles Reduced power consumption Semi-automatic L-sealer Automatic cycle sealing Pack deviation device Film scrap collection device as standard supply	N/A Motorized sealing bar controlled by inverter PTFE-coated sealing blade Closed-circuit liquid cooling of the sealing bars Viewer of the coolant level Sealer and tunnel working height adjustable by means of an outer crank Automatic pack discharge by means of a motorized conveyor Flextron® control system equipped with: Alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays Modular power section, separated from the control panel and characterized by longer-lasting solid state relays Possibility of scheduling up to 10 different work cycles Reduced power consumption Semi-automatic L-sealer Automatic cycle sealing Pack deviation device Film scrap collection device as standard supply	N/A
Note	N/A	N/A Available also in Stainless steel.	N/A	N/A