Practical Packaging Solutions, Inc
1640 Jarvis Avenue,
Elk Gove Village, IL. 60007
Phone: 773.478.6001 • Fax: 773.478.6026
Email: info@practicalpackaging.com • Website: www.practicalpackaging.com
All Categories > Shrink Packaging Systems > Smipack Manual/Semi-automatic Shrink Packaging L-Sealing Equipment > Item # FP560A  


Item # FP560A, Smipack up to 1500 packs/hour Output Semi-automatic Shrink Packaging L-Sealing Equipment

The series FP560 - FP560A - FP870A of manual and semi-automatic L-sealers stand out for an excellent price/quality ratio and for their modular frame. All the models of this range can indeed be supplied with or without shrink tunnel. Compared to the traditional L-sealing hood packers, the FP series provides higher outputs as well as the possibility of using Polyethylene film, besides the traditional shrink films.

The manual and semi-automatic series is the ideal solution for outputs up to 1500 packs/hour.





Specifications  · Features

Specifications

Brands
Smipack

Production Capacity Output
Up to 1500 packs/hour

Note for Production Capacity Output
The stated speed can change according to the product size, the pack collation and the type of film used.

Sealing Bar Length
22.05 in

Sealing Bar Width
16.93 in

Maximum Pack Height
9.06 in

Industry Standards
European Conformity (CE)

Power Supply Voltage
220 V
240 V

Electrical Terminals for 220/240 Volt (V) Power Supply
1PH+N+PE

Power Supply Frequency
50 Hz
60 Hz

Installed Power
2500 W

Speed of Conveyors
62.33 ft/min

Maximum Film Reel Size
23.62 in

Maximum Film Reel Diameter
11.81 in

Machine Length
79.13 in

Machine Width
31.10 in

Machine Height
41.34 in

Machine Net Weight
326 lb

Note
Available also in Stainless steel.


Features
  • Motorized sealing bar controlled by inverter
  • PTFE-coated sealing blade
  • Closed-circuit liquid cooling of the sealing bars
  • Viewer of the coolant level
  • Sealer and tunnel working height adjustable by means of an outer crank
  • Automatic pack discharge by means of a motorized conveyor
  • Flextron® control system equipped with:
    • Alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays
    • Modular power section, separated from the control panel and characterized by longer-lasting solid state relays
    • Possibility of scheduling up to 10 different work cycles
  • Reduced power consumption
  • Semi-automatic L-sealer
  • Automatic cycle sealing
  • Pack deviation device
  • Film scrap collection device as standard supply