Practical Packaging Solutions, Inc
1640 Jarvis Avenue,
Elk Gove Village, IL. 60007
Phone: 773.478.6001 • Fax: 773.478.6026
Email: info@practicalpackaging.com • Website: www.practicalpackaging.com
All Categories > Stretch Wrapping Systems / Palletizers > Automatic : Orion® Fully Automatic Turntable Pallet Wrapping Systems > Item # 3827  


Item # 3827, Rotoplat 3000 HD Automatic Rotating Table Wrapping Machinery

Automatic rotating table with driven roller surface to wrap and stabilize loads on pallets with stretch film to be used in automatic packaging at the end of the line.

Rotoplat series wrapping machines stand out for their driven roller surface rotation system which is made up of a toothed thrust bearing supported by a high load capacity ball bearing and high resistance pin transmission; this construction solution ensures high operating reliability and working life in the most wearing use conditions.





Specifications  · Technical Features  · Standard Electrical Features  · Standard Pneumatic Features  · Reel Features  · Additional Information  · Note

Specifications

Brands
Robopac®

Fixed Pre-Stretch
Up to 340 %

Variable Pre-Stretch Set via Control Panel
150 to 400 %

Containment Force/Corner Compensation
Load Cell

Features
Automatic


Technical Features

Minimum Pallet Dimensions
600 x 800 mm
24 x 32 in

Maximum Pallet Dimensions
1000 x 1200 mm
40 x 48 in

Note for Pallet Dimensions
Possibility of Stretch Wrapping the Half and Quarter Pallet.

Minimum Front Leading
800 mm
32 in

Maximum Front Leading
1,000 mm
40 in

Note for Front Leading
Possibility of Stretch Wrapping the Half and Quarter Pallet.

Minimum Pallet Height
500 mm
20 in

Maximum Pallet Height
2000 mm
80 in

Maximum Pallet Weight
2,000 kg
4,409.25 lb

Table Height
500 mm
20 in

Output Capacity1
40 Pallet/hour

Standard Pre-Stretch Carriage
PGSM

Pre-Stretch Ratio Included
177 %
1 Under defined wrapping cycles and pallet sizes.


Standard Electrical Features

Power Supply Voltage
380 V
400 V
415 V

Power Supply Voltage Tolerance (±)
5 %

Power Supply Frequency
50 Hz


Standard Pneumatic Features

Air Pressure
6 bar


Reel Features

Optional Reel Height
500 to 750 mm
20 to 30 in

Maximum Reel Diameter
250 mm
10 in

Maximum Cardboard Standard Reel Height
510 mm
20.4 in

Workable Film Thickness1
17 to 30 µm

Top Film Thickness
40 to 100 µm
1 According to film quality.


Additional Information
Table rotation speed and relevant acceleration and deceleration ramps are controlled by a frequency converter; this guarantees that the table always stops in phase regardless of the load weight and makes sure it is always aligned with the infeed and outfeed conveyors, assuring correct pallet supply and unloading.

Rotoplat 3000 HD: suited to wrap and move pallets in automatic cycles in merchandise sectors that require high performance.

PGSM Carriage
  • Single motor on board
  • Optional kits for different pre-stretch ratios
  • Can be equipped with reels h. 500 mm - 20" (STD) or h. 750 mm. - 30" (OPT)
PGSA Carriage
  • Two motors on board
  • Can be equipped with reels h. 500 mm - 20" (STD) or h. 750 mm. - 30" (OPT)
Deliver EXACTLY the right amount of film at EXACTLY the right position with EXACTLY the right containment force.
  • Reduces film cost by 30% to 55%
  • Improves load containment
  • Reduces product damage by 40%
Multi-Level Variable Pre-Stretch
  • Ensures best film economy for all loads
  • Ensures best film economy for all films
  • Ensures highest containment level attainable for all films
  • Delivers 30% to 55% film savings
Multi-Level Variable Containment Force
  • Delivers the optimal containment force at each level
  • Enables the delivery of the highest pre-stretch at all levels
Strategic Film Placement
  • Scientific approach to ultimate load containment
  • Place film precisely where it has the most impact on load containment
Proactive Corner Compensation
  • Reduces product damage on corners
  • Improves containment on flat sides of loads
  • Enables higher containment levels on each revolution


Note
The contents of this catalog has been verified before printing. Robopac® reserves the right to modify in every moment the technical characteristics of the products and accessories illustrated in the present document.