AccuGlide™ Taping Heads from 3M
Choose taping heads designed to meet your application requirements
The taping head you select is determined by several factors: the type of equipment you have, case orientation, the speed of the case in feet per minute and the number of cases per shift, day, week and year. For example, the AccuGlide™ STD, NWT and AccuGlide™ II STD taping heads should be used for line speeds under 80 feet per minute. The AccuGlide™ HST taping head can be used for speeds up to 150 feet per minute and in heavy duty, multi-shift or continuous operations. Side-mounted taping heads and powered drive assemblies are also available. All 3M taping heads apply a "C" clip of pressure-sensitive tape to the center seam of your cases.
This taping head has the same features as the AccuGlide™ STD taping head. It is constructed of stainless steel for applications in humid plant conditions or high and low temperature environments, such as in meat packing plants or other food service industries. It is not recommended for areas where direct high pressure wash down is required.
Taping Head Dimensions (without Tape Roll Bracket)
Width |
N/A 4.2 in105 mm |
Length |
N/A 16.5 in420 mm |
Height |
N/A 13.75 in350 mm |
Note |
N/A
|
Packaged Weight |
N/A 18 lbs8.2 kg |
Unpackaged Weight |
N/A 16 lbs7.2 kg |
Case Size Capability
Min. Case (L) |
N/A 6.0 in150 mm |
Min. Case (W) |
N/A 4 1/2 in115 mm |
Min. Case (H) |
N/A 3.5" [90mm] with single head or with upper and lower heads staggered so one tape seal is applied at a time 4.75" [120mm] with upper and lower heads staggered 6.25" [160mm] as mounted in 22A-s 3M-Matic™ Case Sealer |
Max. Case (L) |
N/A Unlimited |
Max. Case (W) |
N/A Unlimited |
Max. Case (H) |
N/A Unlimited |
Specifications
Manufacturer |
N/A 3M |
Operating Rate |
N/A Conveyor speeds up to 80 ft./min. (25m/min.) |
Tape |
N/A For use with 3M brand pressure-sensitive film box sealing tapes. |
Min. Tape Width |
N/A 1 1/2 in36 mm |
Max. Tape Width |
N/A 2 in48 mm |
Tape Roll Diameter1 | N/A Up to 15.5 in [395 mm] maximum on a 3 in [75 mm] diameter core. (Accommodates systems length rolls of 3M brand film tapes.) |
Tape Application Leg Length2 | N/A 2.75 ± 0.25 in70 ± 6 mm |
Warranty and Limited Remedy
N/A
THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE: |
Limitation of Liability
N/A
3M and seller shall not be liable for direct, indirect, special incidental or consequential damages based upon breach of warranty, breach of contract negligence strict liability or any other legal theory. |
- 1 The tape roll diameter capacity may be less due to space limitations where taping heads are installed in machines made by other manufacturers.
- 2 AccuGlide™ II Can be easily adjusted to apply 2" (50mm) tape leg lengths.